Next Green Polebox 330S

Next Green Polebox 330 S is a pole mount for charging boxes, intended for mounting on Ø 60 mm pole tubes. Polebox makes it easier, for example, when changing from an engine heater location to a charging location and can be used to replace an engine heater center. The product is intended for feeding electrical cables inside the pole tube.

Polebox has a mounted distribution terminal for up to 2 x 5G25 mm2 electrical cables for further connection to the next charging post. From the distribution terminal in Polebox, the charging box is then connected with rubber cable.

Polebox is delivered with a DIN rail for RCCB/RCBO and can be optionally equipped with an additional DIN rail for mounting, for example, WiFi router or 4G/5G modem and power supply. Everything fits in the box.

Polebox is made of Swedish steel and powder coated for the highest quality. Polebox is adapted for several models of charging boxes. Hole pattern for charging box is drilled during installation. Polebox is very easy to assemble. It can be prepared indoors by mounting charging box and pulling the wiring from the distribution terminal.

During assembly, Polebox is placed on the existing pipe and the hood with the chargers is lifted and hooked up. It is then easy to access to screw the supply cables into the terminal block.

Complies with: Applicable parts of IEC 61439-7, IP44, IK10.

Features:

Hole pattern for Charge Amps Aura
For mounting on Ø 60 mm pole tube
Robust construction in sheet steel
Weather protection
A large part of the installation can be prepared indoors
Sturdy distribution terminal block for easy connection of the dishes
The distribution terminal block supports 1.5 mm2 - 25 mm2 cable, Al and Cu
Prepared with DIN rail for mounting an RCCB/RCBO/MCB/Surge protector (4 modules)
Powder-coated.

Dimensions:

Weight: 12 kg
Height: 552 mm
Width: 514 mm
Depth: 342 mm
Mounting surface WxH: 327x423 mm