Nextgreen Wallcab 270

Next Green Wallcab is a wall bracket intended for mounting a charging box. Wallcab makes it easier, for example, when changing from an engine heater location to a charging location and can be used to replace an engine heater center. The product is intended for feeding electrical cables from the bottom. The cable can be routed in the gap between the Wallcab and the wall.

The Wallcab has a built-in distribution terminal block for up to 5G25mm² electrical cables for easy connection to the next charging box. The Wallcab is supplied with a DIN rail for two four-module DIN components (earth leakage circuit breaker/personal protection switch). Everything fits in the Wallcab and is easily accessible through the service hatch on the side.

The Wallcab is made of steel and powder coated for the highest quality.

The Wallcab is adapted for several models of charging boxes and the respective mounting frame is drilled during assembly.

The Wallcab is easy to assemble and can be prepared indoors by mounting the charging box and pulling the wiring from the distribution terminal.

• For mounting an EV charging box on a wall
• Weather protection
• Sturdy distribution terminal for easy power supply connection
• The distribution terminal supports 1.5 mm2 -25 mm2 cable, Al and Cu
• Prepared for mounting two four-module DIN components (earth leakage circuit breaker/personal protection switch) with access via the service hatch on the side
• Robust construction in high-strength steel
• A large part of the installation can be prepared indoors
• Powder coated

Selection of compatible charging boxes

Charge Amps Dawn
DEFA Power
GARO Entity Pro
Zaptec Pro

Material
Powder coated Magnelis®, high-strength steel

Dimensions
Weight 11.2 kg
Height 491 mm
Width 270 mm
Depth 198 mm
Mounting surface (WxH) 245×423 mm

Marking & Standard
CE, IEC 61439-7, IP44, IK10